Reply To: SARndbox Freeze?

Home Forums AR Sandbox Forum SARndbox Freeze? Reply To: SARndbox Freeze?


To assist troubleshooting, here are the specs for the workstation in question;

Kernel: 3.19.0-32-generic x86_64 (64 bit gcc: 4.8.2)
Desktop: MATE 1.12.0 (Gtk 3.10.8~8+qiana)
Distro: Linux Mint 17.3 Rosa
System: Dell 
product: Precision Tower 5810 v-01
Mobo: Dell 0K240Y v-A01 
Bios: Dell v-A07 
date: 04/14/2015
	Quad core Intel Xeon E5-1607 v3 (-HT-MCP-) 
	cache: 10240 KB
	flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) 
	bmips: 24740
	clock speeds: 
		max: 3100 MHz 
		1: 1199 MHz 
		2: 1282 MHz 
		3: 1217 MHz
		4: 1397 MHz
	Card: NVIDIA GM204 [GeForce GTX 970] bus-ID: 03:00.0
	Display Server: X.Org 1.17.1 
	drivers: nvidia (unloaded: fbdev,vesa,nouveau)
	Resolution: 800x600@60.3hz
	GLX Renderer: GeForce GTX 970/PCIe/SSE2
	GLX Version: 4.5.0 NVIDIA 367.57 Direct Rendering: Yes
	HDD Total Size: 508.0GB (2.5% used)
	ID-1: /dev/sda model: WDC_WD5000AAKX size: 500.1GB
	ID-2: USB /dev/sdb 

These appear to meet the suggested components from the ‘sticky’ user guide.

To elaborate on the problem further;
The freezing occurs during extensive fluvial simulations, eg when lots of hands are adding water or there is already a large volume of water being simulated.
I have reset the SARndbox resolution to 640×480 via command line which did not improve the issue.

Does anyone have any other advice or similar experience with such a consistent freeze error?

Comments are closed.