Reply To: Build help.

Home Forums AR Sandbox Forum Build help. Reply To: Build help.



I built ours on a budget using pressure treated 2x4s. I have two 2x4s attached vertically to the long side of the sandbox with bolts and wingnuts. The projector is then screwed into a metal plate in between the two 2x4s at the top. I then have two short 2×4 sections extending out horizontally over top of the sand. These sections are attached to the vertical 2x4s using cheap shelf brackets. The camera is then zip-tied to a piece of wood and rests across these two horizontal sections.

The idea was to make this table portable on a cheap budget. Best I could do in the time and budget I had. I have noticed that the wood does warp a little depending on climate which requires the camera to be re-positioned slightly and the system needs to be re-calibrated.

Hope this helps

Comments are closed.