Reply To: Calibration Data

Home Forums AR Sandbox Forum Calibration Data Reply To: Calibration Data

Oliver Kreylos

When you reboot and run sudo /usr/local/bin/KinectUtil getCalib 0, does it print a bunch of stuff followed by “Writing full intrinsic camera parameters to …” and then sit there, or does it hang before that?

If it prints and then hangs, press Ctrl-C to shut it down, then proceed as normal. This sometimes happened with older versions of the Kinect package. It should no longer happen with Kinect-3.5.

If it hangs before printing, you’ll have a bigger issue; check the forum post on “USB problems with Kinect”.

Comments are closed.