Reply To: USB problems with Kinect

Home Forums AR Sandbox Forum USB problems with Kinect Reply To: USB problems with Kinect

#102226
smarley
Participant

Hi, having a big problem getting the Kinect to be recognized. The light comes on and flashes briefly when the Kinect is first plugged in then goes off. I’ve tried it in USB 2 and 3 ports and have the same outcome:

terminate called after throwing an instance of 'std::runtime_error' what(): Kinect::Camera::Camera: Less than 0 Kinect camera devices detected

I then bought a PCIe USB3 card with an NEC chip as recommended, plugged in the extra power connector and still get the same error. The Kinect is model 1414 and has an original power supply. the Kinect works fine under Windows with the official SDK. The output of lsusb is as follows when connected to the PCIe card:

Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 009: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
Bus 003 Device 008: ID 0409:005a NEC Corp. HighSpeed Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 002: ID 046d:c52f Logitech, Inc. Unifying Receiver
Bus 001 Device 003: ID 04d9:2519 Holtek Semiconductor, Inc. Shenzhen LogoTech 2.4GHz receiver
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

The lspci output:

00:14.0 USB controller: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller (rev 31)
03:00.0 USB controller: Renesas Technology Corp. uPD720201 USB 3.0 Host Controller (rev 03)

Anyone have any other ideas on what else I could try? Thanks.

  • This reply was modified 4 years, 3 months ago by smarley.
  • This reply was modified 4 years, 3 months ago by smarley.
  • This reply was modified 4 years, 3 months ago by smarley.

Comments are closed.