AddWaterLocally is at wrong position

Home Forums AR Sandbox Forum AddWaterLocally is at wrong position

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #102109
    SBbuilderGer
    Participant

    Hello SARndbox-builders,

    I’ve accomplished to build the ARSandbox on my device. Thanks to you Oliver and the other members of the forum for all the good advices and instructions.

    As the topic says, i have a problem with the tool AddWaterLocally. I created the tool and saved it as an InputGraph (as it was explained in the forum).
    The problem is that the rain is not coming in the same position as the mouse courser. I thought it might be mirrored or something like that but it wasn’t.
    The topography is always in the right position (therefore i think it has nothing to do with calibration step 7).

    Any idea what could be the reason for this?

    Thanks in advance!

    #102118
    SBbuilderGer
    Participant

    Problem solved. (Repeated complete Calibration)

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed.