Alignment issues

Home Forums AR Sandbox Forum Alignment issues

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #125481
    Michael Hendrix

    Hello All,
    I have been helping a local children’s museum get their sand table setup. We have this issue where parts of the sand table simulation are spot on but other parts (the right side of the table to be exact) seem to pretty far off. Far off as in the projection onto the sand does not line up with the features of the sand. I have ran the projector collaboration tool with and it tracts perfect. During the simulation, its hit or miss in terms of alignment. Any advise or suggestions would be greatly appropriated. Thank You

    Sean Robinson

    Hi Michael,

    Could you tell me the following: Kinect (hardware) model; version numbers for Vrui, Kinect (library), and SARndbox; and Linux distribution?

    I had a similar issue with a Kinect V1. One edge of the projection into the sandbox would not align, no matter how many times I ran the projector calibration. What fixed it for me was to run the optional Kinect calibration.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed.