Alignment Problem

Home Forums AR Sandbox Forum Alignment Problem

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #102471
    cliffnagy
    Participant

    I notice the Sandbox contour line and colors align exactly in the center of the sandbox, but towards the edges they get off-center by about 2-3 inches.

    #102481
    Oliver Kreylos
    Keymaster

    First, try re-running the calibration procedure and collecting more than a single set of tie points, i.e., continue collecting after the crossed lines snap back to the lower-left corner, and the red crosshairs following the disk show up. Also, try collecting points both from above and below the usual sand surface.

    If that doesn’t help, and the red crosshairs do not follow the disk well around the edges of the box, you might have to run per-pixel depth correction on your Kinect to reduce the non-linear distortion of its depth image.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed.