Calibrate Projector – Not Turning Green

Home Forums AR Sandbox Forum Calibrate Projector – Not Turning Green

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #116148
    cogitofire
    Participant

    I am upgrading all of the hardware for our Sandbox (everything but the projector is being replaced) and I have run into an issue. When I get to the calibrate projector steps, the yellow disk never turns green. It stays yellow no matter the height or position of the disk that I am using for calibration. I have tried it with 3 different Kinect Cameras, with and without sand in the sandbox, different USB ports, and multiple total re-installations of all of the software.

    I saw one other post on here with a similar issue but no resolution to the problem. Has anyone seen this before or can anyone think of something else to try for a resolution?

    #116174
    cogitofire
    Participant

    I solved my own problem. Somewhere between versions 2.2 and 2.5, the requirements for the size of the calibration disk must have changed. I had made round cardboard disk for my original sandbox because I didn’t have a CD around at the time. I rounded up a disk and tried it for the calibration and it worked perfectly.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed.