Final Calibration Issues

Home Forums AR Sandbox Forum Final Calibration Issues

Tagged: 

This topic contains 2 replies, has 3 voices, and was last updated by  Oliver Kreylos 9 months ago.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #111111

    cpayne
    Participant

    So i am on the final step of calibrating the AR sandbox, however it isn’t working. Once I open it up and bind it to 1 and 2 keys, only the 2 key works. It flashes red then the 1 key doesn’t do anything. I’ve tried pressing the 1 key first and it still doesn’t do anything, Any help?

    #111196

    Tchambe
    Participant

    I’ve been having this same issue and I haven’t been able to figure out any solutions to this. Did you find anything in the last month that helped?

    #111510

    Oliver Kreylos
    Keymaster

    The ‘1’ key only captures a tie point and advances calibration if it sees a clear image of the calibration disk. Place the disk into the sandbox so that the crosshairs line up, and check that the disk is represented as a green circle, not a yellow circle. Then press ‘1’ to capture the tie point.

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.

Comments are closed.