Lidar Data file input

Home Forums AR Sandbox Forum Lidar Data file input

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
  • #116276

    Our colleagues at the state agency, Texas Water Development Board (TWDB), have successfully setup an AR SandBox but would like to know if there is something to be done to modify the software and take elevation data from a different source, in this case, a file (lidar data) instead of the Kinect sensor and also be able to display the output on a monitor.

    I appreciate any feedback and thank you for your time.

    Oliver Kreylos

    See this thread for how to import a DEM, which could be generated from LiDAR data.

    Regarding sending the output of the AR Sandbox to a monitor, look at the step-by-step instructions, specifically steps 18 and 19.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed.