Problem with displacement

Home Forums AR Sandbox Forum Problem with displacement

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #116344
    Kora169
    Participant

    Hi. We have problem with the shifts on the image. The colours are not exactly depends on high of the sand. Which parameters should we change?

    #116351
    Oliver Kreylos
    Keymaster

    This is handled by projector calibration, step 11 in the installation instructions. If the projection does not line up, redo that step and check that the red crosshairs track your calibration disk after you have completed the first round of calibration tie points.

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.

Comments are closed.