Problem with sandbox's size

Home Forums AR Sandbox Forum Problem with sandbox's size

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #100951
    duinha09
    Participant

    Hi,
    Sorry about my writing, I’m an english learner..
    My problem has started when I increase the distance of my kinect from 127cm to 193cm..When I run SARndbox it just read the curves when they are at a distance of 127 cm from the ground. It’s like if I’ve elevated the entire set.
    I made steps 4 and 5 several times but it didn’t work.

    Another problem which arose: when I’m at step 5 the disk doesn’t become green at all..even when I put it on a glass.

    #100957
    Oliver Kreylos
    Keymaster

    Please check the base plane equation in BoxLayout.txt (first line). The last number in that line corresponds to the vertical position of the zero-elevation plane relative to the camera. If your camera is approx. 2m above the sand, that number should be around -200.

    #100966
    duinha09
    Participant

    Thanks…problem solved

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed.