RawKinectViewer Failed to disable cameras

Home Forums AR Sandbox Forum RawKinectViewer Failed to disable cameras

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #101311

    We followed the Complete Installation Instructions and the Steps 1-5 works well.
    It was possible to download the intrinsic calibration parameters from the firmware.

    The Kinect camera is connected to the pc, here is the output of susb:
    Bus 002 Device 002: ID 045e:0084 Microsoft Corp. Basic Optical Mouse
    Bus 002 Device 007: ID 045e:02ae Microsoft Corp. Xbox NUI Camera
    Bus 002 Device 005: ID 045e:02b0 Microsoft Corp. Xbox NUI Motor
    Bus 002 Device 006: ID 045e:02ad Microsoft Corp. Xbox NUI Audio

    When we try to start the RAWKinectViewer, we get the following errormessage:

    user@ARSandbox ~/src/SARndbox-1.5-001 $ ~/Vrui-3.1/bin/RawKinectViewer -compress 0
    Caught exception Kinect::Camera::startStreaming: Failed to disable cameras

    Do you have any idea? Thanks a lot!



    I have exactly the same issue, my guess is that my old nvidia usb chip on my motherboard is the issue. I tried two other PCs that work with the Kinect just fine, I wonder what part is upsetting it so much.
    I ordered the NEC card, but from Amazon and it should arrive on Wednesday, and I will report back.



    I just found a USB PCI card in my junk PCI card box that fix the issue… looks like this message points to USB issues.


    PS: I looked for an option to just edit the existing comment but I didn’t see it…

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed.