SARndbox Simulation Problem (Black Screen)

Home Forums AR Sandbox Forum SARndbox Simulation Problem (Black Screen)

Viewing 1 post (of 1 total)
  • Author
    Posts
  • #102387
    rcrean13
    Participant

    In runnning the SARndbox program, no visible simulation shows up on the monitor or through the projector onto the sand surface. I also continually get the error “GL error: Unknown error 1286” whenever I run the final program. I believe this is because my graphics card/processor isn’t powerful enough to handle the program, but I did disable the water simulation before running the program.

    I am using a laptop with an intel processor and built in intel graphics card, which I understand should not be able to successfully run the water simulation, but I did expect at least some topographic information to be projected when program execution. Any ideas on what might be the issue?

    I searched around this forum and found another person that had a similar issue, although she/he did not conclusively find a solution to their problem. The forum post can be found at this address: http://lakeviz.org/forums/topic/blackblank-screen-sarndbox/

    Thanks

Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.

Comments are closed.