Screen and Water alignment off

Home Forums AR Sandbox Forum Screen and Water alignment off

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
  • #115908


    I have the AR Sandbox working pretty well right now, its an awesome program but there are two issues i’m currently having with it.

    I installed the scripts so that i could change the water to lava and toxic waste, and since then the water and lava doesn’t fill the whole screen. if i press 1 to fill the world it will fill a box thats maybe 20% smaller than the full screen. it never used to do this. i think it might have happened when the VRUI was rebuilt to include the scripts. Is there a way to fix this?

    Also the last time i calibrated the system i seem to have stuffed up its alignment on the screen and now its cut off. During the calibration the kinect sees the full box but after calibrating it, things are off. i’m just not sure which step i have stuffed up though.

    here are some photos of my issues:

    View post on

    Oliver Kreylos

    The boundaries of the water simulation are read from BoxLayout.txt. Re-do the installation step where you measure the base plane equation and box extents. Afterwards, re-do the projector calibration step.


    ok thanks. ill give that a try when i next have a chance.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed.