Side View

Home Forums AR Sandbox Forum Side View

This topic contains 3 replies, has 4 voices, and was last updated by  Oliver Kreylos 3 months, 1 week ago.

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #102292

    Michael
    Participant

    When I start the sandbox program it gives me a side view instead of a top view. I then use the left mouse button I can rotate the display to centre it. Can someone please suggest how to change the starting view

    #102299

    SteveTsuida
    Participant

    We’re having the same problem at Calgary Protospace. The Sandbox loads into side-view. We’re about to take the sandbox we built to a local Maker Faire this weekend, so any suggestions how to force the sandbox to load into top view before then (August 19th) would be appreciated.

    #111206

    jKrienert
    Participant

    Digging up an old thread here, but experiencing the same problem…

    The initial sandbox view that is 90* to the side is also present during calibration, leading to a non-green disc during tie-point acquisition.

    Has anyone had similar problems and found a solution?

    #111502

    Oliver Kreylos
    Moderator

    The primary issue in this thread is that you have to add “-fpv” to the command line of SARndbox to Fix the Projector View. It appears you have a different problem, but I don’t know what it is.

Viewing 4 posts - 1 through 4 (of 4 total)

You must be logged in to reply to this topic.

Comments are closed.