Would ARsandox run on NVIDIA JETSON NANO DEVELOPER Kit?

Home Forums AR Sandbox Forum Would ARsandox run on NVIDIA JETSON NANO DEVELOPER Kit?

Tagged: 

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #124210
    TuDo
    Participant

    Hi all, I’m building an ARsandox for my son’s and the biggest part of my budget is gone buying a projector and Kinect. The old pc I had planned to use is fried. I’m looking for a budget friendly option and found the nvidia Jetsons developer kit.

    Would the ARsandox software run on the Nvidia Jetson developer kit?

    Nvidia Jetson developer kit

    Thanks for you’re insight and help

    Greetings

    Olaf

    Ps, iff you would know a alternative for €80-100,- that would also be grately appreciated

    NVIDIA JETSON NANO DEVELOPER KIT
    TECHNICAL SPECIFICATIONS
    DEVELOPER KIT
    GPU 128-core Maxwell
    CPU Quad-core ARM A57 @ 1.43 GHz
    Memory 4 GB 64-bit LPDDR4 25.6 GB/s
    Storage microSD (not included)
    Video Encoder 4K @ 30 | 4x 1080p @ 30 | 9x 720p @ 30 (H.264/H.265)
    Video Decoder 4K @ 60 | 2x 4K @ 30 | 8x 1080p @ 30 | 18x 720p @ 30|
    (H.264/H.265)
    Camera 1x MIPI CSI-2 DPHY lanes
    Connectivity Gigabit Ethernet, M.2 Key E
    Display HDMI 2.0 and eDP 1.4
    USB 4x USB 3.0, USB 2.0 Micro-B
    Others GPIO, I2C, I2S, SPI, UART
    Mechanical 100 mm x 80 mm x 29 mm
    Part List:
    1 x NVIDIA® Jeston Nano™ Developer Kit  

    #124228
    Oliver Kreylos
    Keymaster

    The basic AR Sandbox functionality should work, but might be slow depending on whether Jetson supports full OpenGL or only the embedded GLES subset. But the integrated graphics card is definitely too weak to run the water simulation.

    #124754
    TuDo
    Participant

    Thank you very much for the reply. I’ve finished the build in time for my son’s birthday. (Used a pc, not the Jetsons board).
    Thans again for the wonderful project and the hours of fun
    Greetings
    Olaf

    • This reply was modified 1 week, 2 days ago by TuDo.
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.

Comments are closed.