Forum Replies Created

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • in reply to: Common Issues (READ THIS FIRST!) #111085

    mcampono
    Participant

    So I stumbled across the solution to our problem and am posting here in case someone else ever has the same issue. I had accidentally set sea level too high (-125) versus what it should have been closer to -90. Once I changed that in the BoxLayout.txt file it fixed all of the tiny contour lines and the sandbox became responsive again.

    MC

    in reply to: Common Issues (READ THIS FIRST!) #110910

    mcampono
    Participant

    Greetings AR Sandbox Community – We have an inexpensive lab computer that we have been using as a prototype for our AR Sandbox that until recently has been running well by simply turning off the water simulation and just running the contour lines (works great for physical geography). However, we tried setting it up for a lab and are getting an odd screen on the last step of the instructions (./bin/SARndbox -uhm -fpv). It’s a light blue screen covered in tiny circles. The contour lines never actually draw and nothing on the screen updates when you move the sand. We’ve reinstalled the machine with Mint and reinstalled all the software. We’ve also tested with a Kinect that we know works and still get the same error. Link to image.

    Any recommendations?

    Thanks – Mike

Viewing 2 posts - 1 through 2 (of 2 total)