Forum Replies Created

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • in reply to: USB device permissions #102029

    Ross Heeb
    Participant

    I did the make clean, make, make install, and make installudevrule and rebooted and nothing happend.

    I am having the same problem.

    in reply to: How do I Enter my password into the udev directory? #102028

    Ross Heeb
    Participant

    Know my Kinetic is responding with $ ~/Vrui-3.1/bin/KinectUtil getCalib 0
    terminate called after throwing an instance of ‘std::runtime_error’
    what(): Kinect::Camera::Camera: Less than 0 Kinect camera devices detected
    Aborted

    I check another forum but I didn’t understand fully could anyone help?

    in reply to: How do I Enter my password into the udev directory? #102027

    Ross Heeb
    Participant

    Because when I enter it it says (password): command not found.

    in reply to: How do I Enter my password into the udev directory? #102026

    Ross Heeb
    Participant

    So all you do is enter you password after the new line of code?

    in reply to: How do I Enter my password into the udev directory? #102016

    Ross Heeb
    Participant

    When it ask me for the password it’s opens a new line of code and when I try to enter its says (my password) command not found

    in reply to: Complete Installation Instructions #101768

    Ross Heeb
    Participant

    After I ran ~/Vrui-3.1/bin/XBackground it fit the sandbox. Then when I ran ./bin/CalibrateProjector -s 1024 768 I got bash: ./bin/CalibrateProjector: No such file or directory. I am using a BenQ projector. Can you help me.

    in reply to: Complete Installation Instructions #101732

    Ross Heeb
    Participant

    This is what I get after bash Build-Ubuntu.sh. Please enter your password to install Vrui’s prerequisite packages
    Reading package lists… Done
    Building dependency tree
    Reading state information… Done
    Note, selecting ‘libpng12-dev’ instead of ‘libpng-dev’
    Note, selecting ‘libtiff5-dev’ instead of ‘libtiff-dev’
    Some packages could not be installed. This may mean that you have
    requested an impossible situation or if you are using the unstable
    distribution that some required packages have not yet been created
    or been moved out of Incoming.
    The following information may help to resolve the situation:

    The following packages have unmet dependencies:
    build-essential : Depends: libc6-dev but it is not going to be installed or
    libc-dev
    Depends: dpkg-dev (>= 1.13.5) but it is not going to be installed
    g++ : Depends: g++-4.8 (>= 4.8.2-5~) but it is not going to be installed
    libbluetooth-dev : Depends: libbluetooth3 (= 4.101-0ubuntu13) but 4.101-0ubuntu13.1 is to be installed
    Depends: libc6-dev but it is not going to be installed or
    libc-dev
    libdc1394-22-dev : Depends: libc6-dev but it is not going to be installed
    libgl1-mesa-dev : Depends: libgl1-mesa-glx (= 10.1.0-4ubuntu5) but 10.1.3-0ubuntu0.4 is to be installed
    Depends: libdrm-dev (>= 2.4.52) but it is not going to be installed
    Depends: libxdamage-dev but it is not going to be installed
    Depends: libxext-dev but it is not going to be installed
    Depends: libxfixes-dev but it is not going to be installed
    libjpeg-dev : Depends: libjpeg8-dev but it is not going to be installed
    libtiff5-dev : Depends: libtiff5 (= 4.0.3-7) but 4.0.3-7ubuntu0.3 is to be installed
    Depends: libc6-dev but it is not going to be installed or
    libc-dev
    Depends: libjbig-dev but it is not going to be installed
    libudev-dev : Depends: libudev1 (= 204-5ubuntu20) but 204-5ubuntu20.12 is to be installed
    mesa-common-dev : Depends: libdrm-dev (>= 2.4.52) but it is not going to be installed
    zlib1g-dev : Depends: libc6-dev but it is not going to be installed or
    libc-dev
    E: Unable to correct problems, you have held broken packages.
    Problem while downloading prerequisite packages; please fix the issue and try again

    in reply to: Complete Installation Instructions #101731

    Ross Heeb
    Participant

    I have all ready downloaded linux,Set the driver, and made a keyboard binding. When I put wget http://idav.ucdavis.edu/~okreylos/ResDev/Vrui/Build-Ubuntu.sh into the termial it works fine, then when I put bash Build-Ubuntu.sh into it right after it says that that there is no file or directory and I have broken packages. If you could please help I would appreciate that.

    -Thanks Ross

    in reply to: Complete Installation Instructions #101554

    Ross Heeb
    Participant

    Oh wow, this would be great for this project. Do you have any idea when it will be out?

    Thanks, Ross

    in reply to: Complete Installation Instructions #101516

    Ross Heeb
    Participant

    Ok Thank you, what I meant was that to overlay our school from a aerial view. Our plans were to work with our local police department, say if a shooter came into our school we wanted to have a almost like a training with the AR Sandbox. Could we find a program that could draw arrows to a certain point or show dots on the school.

    Thank you, Ross

    in reply to: Complete Installation Instructions #101474

    Ross Heeb
    Participant

    Hi I am an eight grade EAST student at Harrisburg. East is a Computer class that works with the community. I am working on a AR sandbox for our classes, and was wondering is it possible to make our own map. If so how?

    Thanks, Ross

Viewing 11 posts - 1 through 11 (of 11 total)