Forum Replies Created

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • in reply to: SARndbox ability to capture images and height data #102365

    sotoglzz
    Participant

    Hi Lucie, you have to look this post in the sandbox forum:
    http://lakeviz.org/forums/topic/model-export/

    With the LWO files I export it as .ply or pointclod files and you can work with them in a GIS software.

    Additionally, maybe this information can help you:

    https://geospatial.ncsu.edu/osgeorel/tangible-landscape.html

    From the Tangible Landscape site:
    ”’Tangible Landscape (formerly known as TanGeoMS) is a collaborative modeling environment for analysis of terrain changes. We couple a scanner, projector and a physical 3D model with GRASS GIS. We can analyze the impact of terrain changes by capturing the changes on the model, bringing them into the GIS, performing desired analysis or simulation and projecting the results back on the model in real-time. Tangible Landscape, as an easy-to-use 3D sketching tool, enables rapid design and scenarios testing for people with different backgrounds and computer knowledge, as well as support for decision-making process”’

    Unfortunately, it doesn’t work with the kinect that uses the sandbox, you have to purchase a kinect 2.0 and also and adapter for the computer.
    I have it and is amazing for research and also for teaching in school, I have the pdf that explain everything of the tangible landscape, if you give me and email address I can send it to you.

    Regards
    Jose Soto

    in reply to: Ideal model of Kinect #102138

    sotoglzz
    Participant

    The Sandbox will not run with Xbox One Kinect. You can see this page: http://idav.ucdavis.edu/~okreylos/ResDev/SARndbox/ into Hardware Requeriments paragraph. I built a sandbox using first model of kinect (model 1414) and it runs very great.

    Bye
    José Soto

    • This reply was modified 2 years, 7 months ago by  sotoglzz.
    in reply to: Alternative to Sand #102050

    sotoglzz
    Participant

    I built a sandbox using white marble powder, you can purchase it in hardware stores or building materials stores. It makes a lot of dust but adding a little of water you can remove it.

    • This reply was modified 2 years, 9 months ago by  sotoglzz.
    • This reply was modified 2 years, 9 months ago by  sotoglzz.
    in reply to: Intrinsic Calibration Mean #101690

    sotoglzz
    Participant

    Thank Oliver, is very useful this information. I appreciate very much your answers.
    Thank you.

    in reply to: Model Export #101662

    sotoglzz
    Participant

    Thank you Oliver, I solved the problem.

    in reply to: Model Export #101612

    sotoglzz
    Participant

    Hi there!

    I have a VSARndbox up and running using Linux Mint using a Kinect for Xbox 1473. It works great. I have been trying to capture *.lwo files following the LWOwriter of this topic nevertheless I get the following error message:
    I ran ~/Vrui-3.1/bin/KinectViewer -c 0
    and created SavedStreams0001 files

    /home/trinidad/src/Kinect-2.8-002/bin/LWOWriter SavedStreams0001 SavedStreams0001.lwo 60 60

    according to the code from August 31, 2015 at 3:02 pm post
    I get an error the following error message:

    Processing frame 0terminate called after throwing an instance of ‘std::runtime_error’
    what(): IFFChunkWriter::writeChunk: Chunk is too large to write
    Abortado

    I really need to get the LWO files in order to build 3D mesh.

    Thanks in advance Alberto GT

    in reply to: Complete Installation Instructions #101557

    sotoglzz
    Participant

    Hi Oliver, It’s very amazing the AR sandbox
    I have a question, Is there anyway to get the all matrix of coordinates of the sand surface???

    in reply to: Complete Installation Instructions #101360

    sotoglzz
    Participant

    Hi, thank you for the installation instructions, I have a problem when I run main AR sandbox application I get the following error:

    ~/src/SARndbox-1.5-001 $ ./bin/SARndbox -uhm -fpv
    0.1573 x 0.139942
    Violación de segmento

    What do I have to do??

Viewing 8 posts - 1 through 8 (of 8 total)